| Drawing of Record Submitted | 9/21/2007 |
|---|---|
| Electronic Drawing | 9/21/2007 |
| Final Grading Report | 9/21/2007 |
| Date Scheduled | 9/25/2007 |
| BUILDING PERMIT RELEASE APPROVALS | |
| Power | |
| Water | |
| Wastewater | |
| Engineering | |
| City Development Engineer | |
| Landscaping | |
| FINAL INSPECTION RELEASE APPROVALS | |
| Power | 9/25/2007 Approved per Dennis Wright |
| Water | 9/27/2007 Corrections required per Carson Tait..Need to pour 2 fire hyd pads. Mark valve collars in 2720 East St. The back flow assy. Needs one foot of clearence below the drain. It needs to be raised. 9/27/2007 Approved per Lee Kell. Rcvd drawing of records 2/4/2008 Corrections required per Carson Tait..Need to install an R-P back flow assy on the swimming pool supply line. 4/23/2008 Approved per Carson Tait |
| Wastewater | 9/27/2007 Corrections required per Carson Tait..Need to pour 2 fire hyd pads. Mark valve collars in 2720 East St. The back flow assy. Needs one foot of clearence below the drain. It needs to be raised. 9/27/2007 Approved per Lee Kell. Rcvd drawing of records 2/4/2008 Corrections required per Carson Tait..Need to install an R-P back flow assy on the swimming pool supply line. 4/23/2008 Approved per Carson Tait |
| Engineering | 10/9/2007 Approved per Carlos Robles |
| City Development Engineer | 9/25/2007 Corrections required per Cathy H..Electronic Dwg of record need to be in Autocad format not PDF. Also all drainage info needs to be labeled w.size of pipe,inverts,TBC,etc. Also need sewer lateral ties to curb & bldg. Provide TBC elevations for as-builts WRB, etc. 7/17/08 corrections required per Ken B. Remove orange construction fence at the side access and replace with permanent curbing or "end of Road" markers. Solid metal doors are missing at trash enclosure. |
| Landscaping | 9/25/2007 Corrections required Per Ken Bricker.. Building still under construction mat'ls still on site,sono-tube still in place, conc. pad missing at hydrants s/w missing ramp at ends, back parking lot is in/comp,trash enclosure is in/comp. 1/18/08 approved per Ken B. |
| General Comments: | |
